MAHATHOL NC, NC-22 & NC 32
  Neat/Straight Cutting Oil - Non-Staining Inactive Type
 
MAHATHOL NC is an inactive sulphurised cutting oil blended from specially selected high viscosity Index base stocks having oxidation and chemical stability.Chlorine and sulphurised fats are incorporated to provide Anti-weld extreme pressure and oiliness characteristics to these Oils.
MAHATHOL NC protects the tool life and enables the use of these Oils for extreme pressure, low / moderate temperature cutting operations where feed rates are high but operative speed is low.
MAHATHOL NC provides excellent performance in all machining operations on non-ferrous metals and can also be used for machining of ferrous metals where the severity of operation is not high. This Oil is recommended for Gear hobbing, screw cutting, tapping, milling, reaming etc., and they do not discolour the components.
MAHATHOL NC meets IS:3065:1985 (re-affirmed 1990) Type III Grade II specifications.
   
 
    MAHATHOL HONE 7
    NEAT HONING OIL
   
MAHATHOL HONE 7 is a low viscosity honing Oil with excellent Lubricity characterestics and contains carefully selected anti-wear and anti-rust additives. It has the extra fluidity to ensure quick and through flushing activities ensuring very good surface finish and gives long life to the honing stones.
MAHATHOL HONE 7 can also be used for other operations such as turning, drilling and tapping of aluminium alloys and also for certain machining operations of ferrous, non-ferrous metals and copper alloys.
   
  MAHATHOL DRALA 15
    WIRE DRAWING OIL FOR ALUMINIUM
   
MAHATHOL DRALA-15 is a stable, non-staining refined petroleum base oil blended with fatty oils to impart good wetting characteristics. This Oil has good cooling ability and is recommended for use in wire drawing operations.
   
  MAHATHOL DRALA 66
    WIRE DRAWING & FORGING OIL
   
MAHATHOL DRALA 66 is a thick viscous dark coloured mineral oil incorporated with special additives to withstand high temperatures encountered in the deep drawing and die forging operations. These Oils have excellent oxidation stability and die cooling effect. They also have Extreme Pressure additives and anti-wear additives for their effective performance.
MAHATHOL DRALA 66 is recommended for deep drawing and forging operations steel, ferrous, nickel metals, tubes and their alloys. This can be applied by spray. This enhances the die life and ensures sticky free operations in reduction or final polish.
   
  MAHATHOL TEST OIL
    Neat / Straight Cutting Oil - Coolant type
   
MAHATHOL TEST OIL is a neat / straight cutting Oil. It also serves as a coolant. This Oil finds extensive use in aluminium alloys grinding, polishing and for honing operations of steel alloys. This Oil being of low viscosity its swift flow cleans the components of the other metal particles during final polish leaving behind a thin film of oil which acts as a rust preventive.
MAHATHOL TEST OIL has anti-rust additives along with anti-oxidants and deformers incorporated in it. Thus, this oil becomes versatile in its applications.
   
  MAHATHOL NC 14-S
    Neat / Straight Cutting Oil Staining Active Type
    MAHATHOL NC 14-S is a low viscosity cutting oil with chlorine, active sulphur and extreme pressure additives, imparting marked antiweld properties which help machining of intricate shapes with high precision. Being a low viscosity oil, it has excellent cooling and swarf removal characteristics.
MAHATHOL NC 14-S is recommended for difficult machining operations of touch steels in automatic lathes, screw cutting machines where pressurised coolant system is employed for ferrous, ferrous alloys and stainless steel. Not recommended for non-ferrous metals of yellow type as they are liable to stain.
MAHATHOL NC 14-S is also suitable for certain Honing operations.
   
  MAHATHOL NC 32-S
    Neat/Straight Cutting Oil - Staining Active Type
   
MAHATHOL NC 32-S is a medium viscosity dark brown Oil containing Sulphurised fatty materials, free active sulphur and chlorine along with extreme pressure, oiliness and anti corrosive additives. This Oil therefore provides better surface finish, superior metal wettability and better cooling in increased severity operational conditions. They also provide longer cutting tool life over a wide range of operating temperatures.
MAHATHOL NC 32-S is recommended for severe cutting and machining operations of high tensile stainless steel as well as nickel chromium alloys on automatics, gear cutting, hobbing, drilling, reaming and thread cutting machines.
MAHATHOL NC 32-S is not recommended for use on non-ferrous metals or yellow metals which they are liable to stain.
   
  MAHATHOL SOLUCUT 25
    GENERAL PURPOSE EMULSIFIABLE WATER SOLUBLE CUTTING OIL
   
MAHATHOL SOLUCUT 25 is a water soluble cutting oil which forms a milky emulsion and contain rust inhibitor to impart anti-rust, anti-corrosive properties and a biocide to prevent bacterial growth in the emulsion.
MAHATHOL SOLUCUT 25 gives excellent tool life and surface finish and minimises tool wear. This Oil also gives good cooling and lubricating properties. Recommended for a variety of cutting operations on ferrous and non-ferrous metals. Mixing Ratio: Oil to water 1:20. Always oil must be added to water with continuous stirring. It does not decompose chemically, does not give objectionable odour and does not cause de-colourisation or staining. This oil does not affect the skin of the operators.
MAHATHOL SOLUCUT 25 meets IS 1115-1986(Reaffirmed 1991) specifications. Soluble Cutting Oils that can work with very high ppm level hard water (over 1000 ppm) and oils which can work in1:40 ratio are also available.
   
  MAHATHOL DRALA 44
    EMULSIFIABLE PASTE - DEEP DRAWING
    MAHATHOL DRALA 44 is an emulsifiable cream or white coloured paste non-staining. These are formulated by blending of refined petroleum oil with soap and fatty materials. The additives incorporated improve the wetting characteristics and impart film strength required for heavy drawings.
It is also useful in deep drawing of metal sheets.
They have good cooling ability and recommended for Aluminium, Carbon Alloy steels wire and Tube drawing.
   
  MAHATHOL DRALA 22
    EMULSIFIABLE PASTE - DEEP DRAWING
   
MAHATHOL DRALA-22 is an emulsifiable, cream coloured paste non staining. These are formulated by blending of refined petroleum oil with fatty oil and soap formed and this improves the wetting characteristics. It consists of inert fillers which impart film strength required for heavy drawings. They have good cooling abililty and recommended for Carbon Alloy steels wire and Tube drawing.

 


© 2004 MAHATHA PETROLEUM, All Rights Reserved.