PRODUCTION CAPABILITY:

We have a production capacity of about 500 KL per month in single shift with a working area of about 25000 Sq ft. spread over in 3 acres (about 54 grounds of land). We are classified under "Small Scale Sector".

We are having calibrated Storage Tanks, a full fledged Processing Plant, blending facilities, exclusive Grease Processing Plant using Thermax Thermic Fluid Heating System with fully automatic controls, and filtration process using "Sharples" Super Centrifuges and Micron Filtration System.


INFRASTRUCTURE FOR IN-HOUSE TESTING

Sr.No

NAMES OF INSTRUMENTS

TEST PARAMETERS & TEST METHODS

1
CLOUD & POUR POINT APPARATUS For determination of Cloud & Pour Point(ASTM D 2500 & ASTM D 97)
2
SALT SPRAY CHAMBER For evaluating the Rust Preventive properties of metal preservatives under specified conditions.
3
HUMIDITY CABINET (ASTM B 117 & ASTM D 1748)
4
KARL FISCHER TITRATION APPARATUS AUTOMATIC For Determination of moisture in ppm levels. (ASTM D 1744)
5
BOMB CALORIMETER For determination of Sulphur and Chlorine in the Oils.(ASTM D 129 and ASTM D 808)
6
POTENTIOMETRIC TITRATION APPARATUS For determination of Total Base No. and Total Acid Number.(ASTM D 2896, ASTM D 664)
7
RUST PREVENTIVE TEST APPARATUS To evaluate the Rust Preventive ability of Hydraulic and other Oils.(ASTM D 665 A and 665 B)
8
OXIDATION STABILITY APPARATUS To evaluate the tendency of mineral Lubricating Oil to oxidise. (IP 306)
9
pH METER For accurate determinationof pH.
10
SOPHISTICATED ELECTRONIC ANALYTICAL BALANCE For very accurate measurement of weights.
…Contd.
Besides, we have the required Apparatus/Instruments and facilities for complete inspection of all parameters of Lubricants, as detailed below. Test Facilities are regularly upgraded with required Instruments/Equipments
.
Sr.No Test Parameters Test Method
1 Specific Gravity by Hydrometer ASTM D 1298
2 Aniline Point ASTM D 611
3 Acid Number ASTM D 974
4 Base Number ASTM D 974
5 Initial Boiling Point & Final Boiling Point ASTM D 86
6 Flash Point by C.O.C. ASTM D 92
7 Flash Point by P.M.C.C. ASTM D 93
8 Colour ASTM D 1500
9 Melting Point ASTM D 87
&ASTM D 127
10 Dropping Point of Greases ASTM D 566
11 Cone Penetration of Greases ASTM D 217
12 Copper Corrosion ASTM D 130
13 Sulphated Ash ASTM D 874
14 Saponification Number ASTM D 94
15 Cast Iron Corrosion Test IS 1115 &IP 287
16 Redwood Viscosity No. 1 & 2 IS 8891
17 Pour Point ASTM D 97
18 Cloud Point ASTM D 2500

 


Home  /  Profile  /  Products  /  Services  /  Infrastructure  /  Quality  /  Clients  /  Trade Enquiry  /  Feedback  / Contact Us


© 2004 MAHATHA PETROLEUM, All Rights Reserved.